You are here:>Home>DYN Processed Bronzes>PAN AL10

PAN AL10

Interested in this product? For further information on this product and how to order, please give us a call on +44 (0)20 8961 0656 or send us a message here.

Bronze image

PAN AL10 is an aluminium bronze that offers very high load carrying capacity with impact resistance and good resistance to erosion/corrosion by seawater and some acids. PAN AL10 features in diverse environments and applications. Requires a hardened fine finished mating surface to bed in and a good lubrication regime is essential.

DYN Processed Bronzes offer genuine and measurable advantages over standard British, European and American bronze grades. Chemically and mechanically, DYN bronzes appear similar to their respective common counterparts, but distinguish themselves through their performance, longer wear life, longevity and superior service. This is achieved through a special process conducted in-house, which gives our bronzes a finer grain structure. It is this structural change and realignment which gives our bronze its unique properties.

TYPICAL APPLICATIONS

  • Cranes
  • High-temperature application in conveyors
  • Carousel bearings
  • High-pressure pistons for compressors and hydraulic systems
  • Worm-wheels and gears
  • Valve guides (steam valves)
  • Knuckle and crank bearings for presses and cold heading forging machines

 

MECHANICAL PROPERTIES

  • Tensile 0.2% Proof Stress (N/mm2): 380
  • Tensile Strength (N/mm2): 750
  • Elongation (%): 16
  • Brinell Hardness (BHN): 180
  • Compression 0.2% Proof Stress (N/mm2): 290
  • Young's Modulus (E): 125
  • Coefficient of expansion 20oC - 100oC (10-6/K): 17
  • Thermal Conductivity (W/mk): 60
  • Electrical Conductivity (m/?mm2): 5
  • Density (kg/dm3): 7.6
  • Maximum Permissible Operating Temperature (oC): 450
  • Maximum Permissible Load Pmax (N/mm2): 150
  1. These figures are for centrifugal castings and recommended for design calculations.
  2. Pmax values for load have been established in practice for the worst conditions, that is maximum load permissible for no permanent metal deformation when sliding movement is minimal.
  3. The values for physical properties were obtained by laboratory tests. They do not show the anti-friction and anti-corrosion qualities or the high resistance to wear for which DYN Bronze alloys are renowned.

Interested in this product? For further information on this product and how to order, please give us a call on +44 208 961 0656 or send us a message here.

DYN PROCESSED BRONZES

DYN Processed Bronzes >

  • TIN BRONZES

  • LEAD BRONZES

  • ALUMINIUM BRONZES

  • HIGH TENSILE BRASSES