You are here:>Home>DYN Processed Bronzes>PAN ALMBz 220

PAN AlMBz 220

Interested in this product? For further information on this product and how to order, please give us a call on +44 (0)20 8961 0656 or send us a message here.

Bronze image

PAN AlMBz 220 is an aluminium bronze offering the very highest load carrying and impact capacity. Can tolerate the highest operating temperatures, working in a seawater environment and the highest loads but a hardened fine finished mating surface and a good lubrication regime are essential for correct operation.

DYN Processed Bronzes offer genuine and measurable advantages over standard British, European and American bronze grades. Chemically and mechanically, DYN bronzes appear similar to their respective common counterparts, but distinguish themselves through their performance, longer wear life, longevity and superior service. This is achieved through a special process conducted in-house, which gives our bronzes a finer grain structure. It is this structural change and realignment which gives our bronze its unique properties.

TYPICAL APPLICATIONS

  • Can be used for various tooling applications
  • Wiper dies
  • Mandrels
  • Crane bearings 
  • Carousel bearings
  • Pads and slides
  • Drawing Dies
  • Forming rollers
  • Wormgears
  • Feed nuts
  • Pressure valves in hydraulic systems 

MECHANICAL PROPERTIES

  • Tensile 0.2% Proof Stress (N/mm2): 400 
  • Tensile Strength (N/mm2): 750 
  • Elongation (%): 8 
  • Brinell Hardness (BHN): 220 
  • Compression 0.2% Proof Stress (N/mm2): 380 
  • Young's Modulus (E): 75 
  • Coefficient of expansion 20oC - 100oC (10-6/K): 17 
  • Thermal Conductivity (W/mk): 60 
  • Electrical Conductivity (m/Ωmm2): 4 
  • Density (kg/dm3): 7.5 
  • Maximum Permissible Operating Temperature (oC): 450 
  • Maximum Permissible Load Pmax (N/mm2): 200 
  1. These figures are for centrifugally cast pieces and recommended for design calculations.
  2. Pmax values for load have been established in practice for the worst conditions, that is maximum load permissible for no permanent metal deformation when sliding movement is minimal.
  3. The values for physical properties were obtained by laboratory tests. They do not show the anti-friction and anti-corrosion qualities or the high resistance to wear for which DYN Bronze alloys are renowned.

Interested in this product? For further information on this product and how to order, please give us a call on +44 208 961 0656 or send us a message here.

DYN PROCESSED BRONZES

DYN Processed Bronzes >

  • TIN BRONZES

  • LEAD BRONZES

  • ALUMINIUM BRONZES

  • HIGH TENSILE BRASSES